Interior plastering

Probably everyone wants to make their home attractive not only from the outside, but also from the inside.

One of the most common ways of finishing walls is using plaster. At the same time, today this method is relatively inexpensive. Considering that modern technologies and materials allow achieving excellent technological and aesthetic indicators, plaster can be called an ideal finishing method.

However, plastering interior walls requires a certain amount of experience and professionalism from the performer. Therefore, if you decide to plaster the walls of your home, but are not confident in your abilities, it is best to contact specialists.

Construction supermarkets offer consumers a wide range of interior plasters on a gypsum base. Plasters are usually sold in the form of mixtures in containers of up to 50 kg. Before applying plaster to the walls, their surface must be properly prepared - leveled and cleaned from the remains of old finishing materials.

After this procedure, you can begin preparing the solution in accordance with the manufacturer's instructions. To mix the solution, you can use an electric drill with a special mixer attachment. The prepared mixture is thrown onto the wall with a spatula and evenly distributed in thin layers. It is recommended to hold the spatula at an angle of 45 degrees to the surface to avoid unevenness. After the first layer has dried, you can begin applying the second. Unevenness on the surface of the plastered surface can be cleaned with sandpaper.